Profile

The GTS from ROTRONIC is a tried-and-tested instrument for measurement of equilibrium relative humidity and temperature in stacks of paper and cardboard.Humidity measurements in stacks of paper, cardboard and textiles for paper and textile technicians and printers

Product information :

• Range of application: -10…60 °C / 0…100 %rh
• Accuracy at 23°C ±5 K: 1.5 %rh, 0.3 K
• Adjusted at 23 °C and 35, 80 %rh
• Measurement range: 0…50 °C / 5…99.9 %rh

Set consists of :

• GTS handheld instrument with sword probe
• Calibration device: EGSS
• CS calibration standard: EA50-SCS (5 ampoules, 50 %rh with SCS certificate)Adjustment screwdriver
• Carry case: AC1102

INDUSTRIAL CALIBRATIONPortable Dry Blocks, TTemperature calibrator covering from -100°C to 1200°C

The Medusa Model 511 can be used to 700°C and features three zone control. In addition to the main heating zone there are additional top and bottom heaters which compensate for the end losses creating a constant temperature zone across the well.
http://www.dpstar.com.my/heating-sensing-and-controls/isotech

These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility.
http://www.dpstar.com.my/heating-sensing-and-controls/isotech

These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility.
http://www.dpstar.com.my/heating-sensing-and-controls/isotech

These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility.
http://www.dpstar.com.my/heating-sensing-and-controls/isotech/isocal

The Hyperion and Drago have large calibration volumes, 65mm x 160mm deep, which makes them ideal to use as portable liquid baths.
http://www.dpstar.com.my/heating-sensing-and-controls/isotech/isocal

During early 2004, 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration.
http://www.dpstar.com.my/heating-sensing-and-controls/isotech/dry-block

The Isis Dry Block offers operation to temperatures as low as -100°C, and is the only block bath working to such a low temperature.
http://www.dpstar.com.my/heating-sensing-and-controls/isotech/dry-block

The Oceanus-6  has all the advantages of the Isocal-6 models but with a substantially larger calibration volume, 50mm diameter by 300mm deep.
http://www.dpstar.com.my/heating-sensing-and-controls/isotech/isocal

The pressure switches operate with a snap-acting switching mechanism which is controlled by a diaphragm and which is adjusted with helical springs. If the set value is exceeded, a contact is activated, deactivated or switched over.The pressure switches are either permanently set at the factory or can be adjusted by the user himself for a wide range of switching pressures.

The switching pressure can be defined at a value of between 5 mbar and 12 bar in the overpressure range and between -5 mbar and -900 mbar in the vacuum range.